phpor – 第35页 – PHPor 的Blog

第一步：安装

# pip install paramiko
Collecting paramiko
  Downloading paramiko-2.2.1-py2.py3-none-any.whl (176kB)
    100% |████████████████████████████████| 184kB 10kB/s
Collecting cryptography>=1.1 (from paramiko)
  Downloading cryptography-2.0.3-cp27-cp27mu-manylinux1_x86_64.whl (2.2MB)
    100% |████████████████████████████████| 2.2MB 5.1kB/s
Collecting bcrypt>=3.1.3 (from paramiko)
  Downloading bcrypt-3.1.3-cp27-cp27mu-manylinux1_x86_64.whl (57kB)
    100% |████████████████████████████████| 61kB 3.1kB/s
Collecting pyasn1>=0.1.7 (from paramiko)
^@  Downloading pyasn1-0.3.2-py2.py3-none-any.whl (63kB)
    100% |████████████████████████████████| 71kB 1.3kB/s
Collecting pynacl>=1.0.1 (from paramiko)
  Downloading PyNaCl-1.1.2-cp27-cp27mu-manylinux1_x86_64.whl (539kB)
    100% |████████████████████████████████| 542kB 4.4kB/s
Collecting idna>=2.1 (from cryptography>=1.1->paramiko)
  Downloading idna-2.6-py2.py3-none-any.whl (56kB)
    100% |████████████████████████████████| 61kB 4.5kB/s
Collecting six>=1.4.1 (from cryptography>=1.1->paramiko)
  Downloading six-1.10.0-py2.py3-none-any.whl
Collecting ipaddress (from cryptography>=1.1->paramiko)
  Downloading ipaddress-1.0.18-py2-none-any.whl
Collecting asn1crypto>=0.21.0 (from cryptography>=1.1->paramiko)
  Downloading asn1crypto-0.22.0-py2.py3-none-any.whl (97kB)
    100% |████████████████████████████████| 102kB 4.2kB/s
Collecting enum34 (from cryptography>=1.1->paramiko)
  Downloading enum34-1.1.6-py2-none-any.whl
Collecting cffi>=1.7 (from cryptography>=1.1->paramiko)
  Downloading cffi-1.10.0-cp27-cp27mu-manylinux1_x86_64.whl (392kB)
    100% |████████████████████████████████| 399kB 4.2kB/s
Collecting pycparser (from cffi>=1.7->cryptography>=1.1->paramiko)
  Downloading pycparser-2.18.tar.gz (245kB)
    100% |████████████████████████████████| 256kB 6.0kB/s
Installing collected packages: idna, six, ipaddress, asn1crypto, enum34, pycparser, cffi, cryptography, bcrypt, pyasn1, pynacl, paramiko
  Running setup.py install for pycparser ... done
Successfully installed asn1crypto-0.22.0 bcrypt-3.1.3 cffi-1.10.0 cryptography-2.0.3 enum34-1.1.6 idna-2.6 ipaddress-1.0.18 paramiko-2.2.1 pyasn1-0.3.2 pycparser-2.18 pynacl-1.1.2 six-1.10.0
You are using pip version 8.1.2, however version 9.0.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.

# pip install paramiko

Collecting paramiko

Downloading paramiko-2.2.1-py2.py3-none-any.whl (176kB)

100% |████████████████████████████████| 184kB 10kB/s

Collecting cryptography>=1.1 (from paramiko)

Downloading cryptography-2.0.3-cp27-cp27mu-manylinux1_x86_64.whl (2.2MB)

100% |████████████████████████████████| 2.2MB 5.1kB/s

Collecting bcrypt>=3.1.3 (from paramiko)

Downloading bcrypt-3.1.3-cp27-cp27mu-manylinux1_x86_64.whl (57kB)

100% |████████████████████████████████| 61kB 3.1kB/s

Collecting pyasn1>=0.1.7 (from paramiko)

^@ Downloading pyasn1-0.3.2-py2.py3-none-any.whl (63kB)

100% |████████████████████████████████| 71kB 1.3kB/s

Collecting pynacl>=1.0.1 (from paramiko)

Downloading PyNaCl-1.1.2-cp27-cp27mu-manylinux1_x86_64.whl (539kB)

100% |████████████████████████████████| 542kB 4.4kB/s

Collecting idna>=2.1 (from cryptography>=1.1->paramiko)

Downloading idna-2.6-py2.py3-none-any.whl (56kB)

100% |████████████████████████████████| 61kB 4.5kB/s

Collecting six>=1.4.1 (from cryptography>=1.1->paramiko)

Downloading six-1.10.0-py2.py3-none-any.whl

Collecting ipaddress (from cryptography>=1.1->paramiko)

Downloading ipaddress-1.0.18-py2-none-any.whl

Collecting asn1crypto>=0.21.0 (from cryptography>=1.1->paramiko)

Downloading asn1crypto-0.22.0-py2.py3-none-any.whl (97kB)

100% |████████████████████████████████| 102kB 4.2kB/s

Collecting enum34 (from cryptography>=1.1->paramiko)

Downloading enum34-1.1.6-py2-none-any.whl

Collecting cffi>=1.7 (from cryptography>=1.1->paramiko)

Downloading cffi-1.10.0-cp27-cp27mu-manylinux1_x86_64.whl (392kB)

100% |████████████████████████████████| 399kB 4.2kB/s

Collecting pycparser (from cffi>=1.7->cryptography>=1.1->paramiko)

Downloading pycparser-2.18.tar.gz (245kB)

100% |████████████████████████████████| 256kB 6.0kB/s

Installing collected packages: idna, six, ipaddress, asn1crypto, enum34, pycparser, cffi, cryptography, bcrypt, pyasn1, pynacl, paramiko

Running setup.py install for pycparser ... done

Successfully installed asn1crypto-0.22.0 bcrypt-3.1.3 cffi-1.10.0 cryptography-2.0.3 enum34-1.1.6 idna-2.6 ipaddress-1.0.18 paramiko-2.2.1 pyasn1-0.3.2 pycparser-2.18 pynacl-1.1.2 six-1.10.0

You are using pip version 8.1.2, however version 9.0.1 is available.

You should consider upgrading via the 'pip install --upgrade pip' command.

作者存档：phpor

xmodem协议及其python实现

python 之 django学习笔记

python web开发框架

关于webssh的实现

文件打开之“文本模式”与“二进制模式”

spring bean 顺序问题

logstash-output-syslog 之 facility定义问题

给容器设置网络

paramiko模块学习

rpmbuild 之 devel